Technical Pages Archive - Fuller Fasteners : Fuller Fasteners

Technical Pages

Bumax:

Volkel:

General Information:

Thread Identification Chart:

Conversions:

Mechanical Properties:

Stainless Steel Data:

Tolerance Charts:

Product Specifications:

Threaded Inserts:

DIN Specifications:

ISO Specifications:

ANSI / ASME Specifications:

EN Specifications:

JIS Specifications:

NFE Specifications:

Weights:

DIN Specifications:

  • DIN 1 Specifications – Taper Pins With Round End
  • DIN 103 Specifications – Trapezoidal Hex Nut
  • DIN 103 Specifications – Trapezoidal Rods
  • DIN 103 Specifications – Trapezoidal Round Nut
  • DIN 1052 Specifications – Washers for Wood Constructions
  • DIN 125 Specifications – Flat Washer – Normal Series
  • DIN 126 Specifications – Flat Washers – Normal series
  • DIN 127B Specifications – Spirng Lock Washer – Type B
  • DIN 128A Specifications – Spring Lock Washers – Type A
  • DIN 128B Specifications – Spring Lock Washers – Type B
  • DIN 137A Specifications – Curved Spring Washers
  • DIN 137B Specifications – Wave Spring Washers
  • DIN 1440 Specifications – Flat Washers for Clevis Pins
  • DIN 1441 Specifications – Washers for Clevis Pins
  • DIN 1469 Specifications – Grooved Pins Half Length Grooved With Gorge
  • DIN 1470 Specifications – Grooved Pins Full-Length Parallel Grooved with Pilot
  • DIN 1471 Specifications – Grooved pins – Full Length Taper Grooved
  • DIN 1472 Specifications – Grooved pins – Half-length Taper Grooved
  • DIN 1473 Specifications – Grooved Pins – Full-Length Parallel Grooved with Chamfer
  • DIN 1474 Specifications – Grooved Pins – Half-Length Reverse-Taper Grooved
  • DIN 1475 Specifications – Grooved pins – One Third Length Centre Grooved
  • DIN 1476 Specifications – Round Head Grooved Pins
  • DIN 1477 Specifications – Grooved Pins with Countersunk Head
  • DIN 1479 Specifications – Hex Turnbuckle Nuts
  • DIN 1481 Specifications – Spring-type Straight Pins – Slotted
  • DIN 15237 Specifications – Seating Screws
  • DIN 1587 Specifications – Hex Domed Cap Nuts
  • DIN 1624 Specifications – Tee Nuts with Pronge
  • DIN 1804 Specifications – Slotted Round Nuts
  • DIN 186 Specifications – T-heads Bolts
  • DIN 188 Specifications – T-head Bolts With Double Nib
  • DIN 2093 Specifications – Disc Spring Washers
  • DIN 25201 Specifications – Dual Lock Washer
  • DIN 315 Specifications – Wing Nuts
  • DIN 316 Specifications – Wing Screws with Rounded Wings
  • DIN 404 Specifications – Slotted Capstan Screws
  • DIN 417 Specifications – Slotted Set Screws with Long Dog Point
  • DIN 427 Specifications – Slotted Head Screws with Shank
  • DIN 431 Specifications – Pipe Nuts with Thread
  • DIN 432 Specifications – Washer with External Tap
  • DIN 433-1 Specifications – Flat Washers – Small Series
  • DIN 434 Specifications – Square Taper Washers for U-sections
  • DIN 435 Specifications – Square Taper Washer
  • DIN 436 Specifications – Square Washer
  • DIN 438 Specifications – Slotted Set Screws with Cup Point
  • DIN 439 Specifications – Hex Thin Nuts
  • DIN 444 Specifications – Eye Bolts
  • DIN 462 Specifications – Internal Tap Washer
  • DIN 463 Specifications – Tab Washer with 2 Taps
  • DIN 464 Specifications – Knurled Thumb Screws
  • DIN 466 Specifications – Knurled Nuts – High Type
  • DIN 467 Specifications – Knurled Nuts – Low Type
  • DIN 470 Specifications – Sealing Discs
  • DIN 471 Specifications – Retaining Rings for Shafts
  • DIN 472 Specifications – Retaining Rings for Bores
  • DIN 478 Specifications – Square Head Bolts with Collar
  • DIN 479 Specifications – Square Head Bolts With Short Dog Point
  • DIN 480 Specifications – Square Head Bolts
  • DIN 508 Specifications – T-slot Nuts
  • DIN 525 Specifications – Studs for Welding
  • DIN 529 Specifications – Masonry Bolts
  • DIN 551 Specifications – Slotted Grub Screws with Flat Point
  • DIN 553 Specifications – Slotted Grub Screws with Cone Point
  • DIN 555 Specifications – Hex Nuts
  • DIN 557 Specifications – Square Nuts
  • DIN 558 Specifications – Hex Head Screws
  • DIN 561B – Hex Head Screw – Dog Point Specifications
  • DIN 562 Specifications – Sqaure Thin Nuts
  • DIN 571 Specifications – Hex Head Wood Screws
  • DIN 580 Specifications – Lifting Eye Bolts
  • DIN 582 Specifications – Lifting Eye Nuts
  • DIN 603 Specifications – Cup Head Square Neck Bolts
  • DIN 604 Specifications – Flat Countersunk Nib Bolts
  • DIN 605 Specifications – Flat Countersunk Square Neck Bolts
  • DIN 607 Specifications – Cub Head Nib Bolts
  • DIN 608 Specifications – Flat Countersunk Square Neck Bolts
  • DIN 609 Specifications – Hex Fit Bolts
  • DIN 610 Specifications – Hex Fit Bolts
  • DIN 6319C Specifications – Spherical Washers – Form C
  • DIN 6319D Specifications – Conical Seats Washers – Form D
  • DIN 6325 Specifications – Parallel Pins with Round End
  • DIN 6334 Specifications – Hex Coupling Nuts
  • DIN 6340 Specifications – Washer for Clamping Devices
  • DIN 653 Specifications – Knurled Thumb Screws – Low Type
  • DIN 6796 Specifications – Conical Spring Washers
  • DIN 6797A Specifications – Toothed Lock Washer – Type A
  • DIN 6797J Specifications – Toothed Lock Washer – Type J
  • DIN 6797V Specifications – Toothed Lock Washer – Type V
  • DIN 6798A Specifications – Serrated Lock Washers – Type A
  • DIN 6798J Specifications – Serrated Lock Washers – Type J
  • DIN 6798V Specifications – Serrated Lock Washers – Type V
  • DIN 6799 Specifications – Retaining Rings for Shafts
  • DIN 6880 Specifications – Key Stock
  • DIN 6885 Specifications – Parallel Keys Deep Pattern
  • DIN 6888 Specifications – Woodruff Keys
  • DIN 6911 Specifications – Hex Socket Screw Keys with Pilot
  • DIN 6912 Specifications – Hex Socket Head Cap Screws
  • DIN 6914 Specifications – Hex Bolts with Large Head System HV
  • DIN 6915 Specifications – High-strength Hex Nuts for Structural Bolting
  • DIN 6916 Specifications – Plain Chamfered Washers
  • DIN 6918 Specifications – Square Taper Washers
  • DIN 6921 Specifications – Hex Flange Bolts
  • DIN 6923 Specifications – Hex Flange Nuts
  • DIN 6926 Specifications – Hex Nuts with Flange
  • DIN 6927 Specifications – Hex Nuts With Flange
  • DIN 7 Specifications – Parallel Pins
  • DIN 705 Specifications – Adjusting Rings
  • DIN 7343 Specifications – Spring-Type Straight Pins – Coiled
  • DIN 7346 Specifications – Spring-type Straight Pins
  • DIN 7349 Specifications – Thick Flat Washer
  • DIN 74361 Specifications – Countersunk Spring Lock Washer
  • DIN 7500C Specifications – Cross Recessed Pan Head Thread Rolling Screws
  • DIN 7500M Specifications – Cross Recessed Countersunk Head Thread Rolling Screws
  • DIN 7603A Specifications – Sealing Ring Washer – Form A
  • DIN 7603C Specifications – Sealing Ring Washer – Form C
  • DIN 7967 Specifications – Self Locking Counter Nuts
  • DIN 7968 Specifications – Hex Shoulder Bolt
  • DIN 7978 Specifications – Taper Pins with Internal Thread
  • DIN 7979D Specifications – Parallel Pins with Internal Thread
  • DIN 7980 Specifications – High Collar Lock Washer
  • DIN 7981 Specifications – Pan Head Tapping Screws
  • DIN 7982 Specifications – Countersunk Head Tapping Screws
  • DIN 7983 Specifications – Countersunk Head Tapping Screws
  • DIN 7984 Specifications – Hex Socket Head Cap Screws with Low Head
  • DIN 7985 Specifications – Recessed Raised Cheese Head Screws
  • DIN 7989 Specifications – Flat Washers for Steel Construction
  • DIN 7991 Specifications – Hex Socket Countersunk Head Cap Screws
  • DIN 835 Specifications – Studs – Metal End ≈ 2d
  • DIN 84 Specifications – Slotted Cheese Head Screws
  • DIN 85 Specifications – Slotted Pan Head Screws
  • DIN 9021 Specifications – Large Plain Washer
  • DIN 906 Specifications – Hex Socket Pipe Plugs
  • DIN 908 Specifications – Hex Socket Screw Plugs
  • DIN 910 Specifications – Hex Head Screw Plugs
  • DIN 911 Specifications – Hex Keys
  • DIN 912 Specifications – Hex Socket Head Cap Screws
  • DIN 913 Specifications – Hex Socket Set Screws with Flat Point
  • DIN 914 Specifications – Hex Socket Set Screws with Cone Point
  • DIN 915 Specifications – Hex Socket Set Screws with Dog Point
  • DIN 916 Specifications – Hex Socket Set Screws with Cup Point
  • DIN 917 Specifications – Hex Cap Nuts – Low Type
  • DIN 920 Specifications – Slotted Pan Head Screws
  • DIN 921 Specifications – Slotted Pan Head Screws With Large Head
  • DIN 923 Specifications – Slotted Pan Head Screws
  • DIN 927 Specifications – Slotted Shoulder Screws
  • DIN 928 Specifications – Square Weld Nuts
  • DIN 929 Specifications – Hex Weld Nuts
  • DIN 93 Specifications – Tab Washers with Long Tab
  • DIN 931 Specifications – Hex Head Bolts with Shank – Partially Threaded
  • DIN 933 Specifications – Hex Head Screws – Fully Threaded
  • DIN 934 Specifications – Hex Regular Bolts
  • DIN 935 Specifications – Hex Slotted and Castle Nuts
  • DIN 936 Specifications – Hex Thin Nuts Chamfered
  • DIN 937 Specifications – Hex Thin Slotted and Castle Nuts
  • DIN 938 Specifications – Studs – Metal End ≈ 1 d
  • DIN 939 Specifications – Studs-Metal End ≈ 1.25 d
  • DIN 94 Specifications – Split Cotter Pins
  • DIN 95 Specifications – Slotted Raised Countersunk Head Wood Screws
  • DIN 96 Specifications – Slotted Round Head Wood Screws
  • DIN 960 Specifications – Hex Head Bolts with Fine Pitch Thread
  • DIN 961 Specifications – Hex Head Screws with Fine Pitch Thread
  • DIN 963 Specifications – Slotted Countersunk Head Screws
  • DIN 964 Specifications – Slotted Raised Countersunk Head Screws
  • DIN 965 Specifications – Cross Recessed Countersunk Head Screws
  • DIN 966 Specifications – Cross Recessed Raised Countersunk Head Screws
  • DIN 97 Specifications – Slotted Countersunk Head Wood Screws
  • DIN 975 | DIN 976 Specifications – Threaded Rods | Stud Bolts
  • DIN 979 Specifications – Hex Thin Slotted and Castle Nuts
  • DIN 980 Specifications – Hex Nuts with Single Piece Metal Type V
  • DIN 982 Specifications – Hex Thick Nuts with Non-Metallic Insert
  • DIN 985 Specifications – Hex Lock Nut
  • DIN 986 Specifications – Hex Domed Cap Nuts With Nonmetallic Insert
  • DIN 988 Specifications – Shim Rings
  • DIN 1480 Specifications
  • DIN 661 Specifications
  • DIN 660 Specifications
  • DIN 196 Specifications
  • DIN 193 Specifications

    • ISO Specifications:

  • ISO 10642 Specifications – Hex Socket Countersunk Head Screws
  • ISO 1207 Specifications – Slotted Cheese Head Screws
  • ISO 1234 Specifications – Split Cotter Pins
  • ISO 12474 Specifications – Hex Socket Cap Screws
  • ISO 14580 Specifications – Hexalobular Socket Cheese Head Screws
  • ISO 14581 Specifications – Hex Socket Countersunk Head Screws
  • ISO 14583 Specifications – Hex Socket Pan Head Screws
  • ISO 2009 Specifications – Slotted Countersunk Flat Head Screws
  • ISO 2338 Specifications – Parallel pins
  • ISO 2339 Specifications – Taper Pins
  • ISO 4014 Specifications – Hex Head Bolts with Socket
  • ISO 4017 Specifications – Hex Head Screws – Fully Threaded
  • ISO 4026 Specifications – Hex Socket Set Screws with Flat Point
  • ISO 4027 Specifications – Hex Socket Set Screws with Cone Point
  • ISO 4028 Specifications – Hex Socket Set Screws with Dog Point
  • ISO 4029 Specifications – Hex Socket Set Screws with Cup Point
  • ISO 4032 Specifications – Hex Regular Nuts
  • ISO 4035 Specifications – Hex Thin Nuts
  • ISO 4762, 12474 Specifications – Hex Socket Cap Screws
  • ISO 7045 Specifications – Pan Head Screws with Cross Recess
  • ISO 7046-1 Specifications – Countersunk Flat Head Screws
  • ISO 7046-2 Specifications – Countersunk Flat Head Screws
  • ISO 7047 Specifications – Raised Countersunk Head Screws
  • ISO 7089 Specifications – Plain washers
  • ISO 7379 Specifications – Hex Socket Head Shoulder Screws
  • ISO 7380-1 Specifications – Hex Socket Button Head Screws
  • ISO 7380-2 Specifications – Hex Socket Button Head Screws
  • ISO 8673 Specifications – Hex Regular Nuts – Fine Pitch Thread
  • ISO 8676 Specifications – Hex Head Screws with Fine Pitch Thread
  • ISO 8734 Specifications – Parallel Pin – Dowel Pins
  • ISO 8750 Specifications – Spring-Type Straight Pins – Coiled
  • ISO 8752 Specifications – Spring-type Straight Pins – Slotted
  • ISO 8765 Specifications – Hex Head Bolts With Fine Pitch Thread