Volkel Cutting Tools

Hand taps, machine taps, threading dies or combined taps, sets with and without core hole drills, with tools for cutting of right- or left-hand threads, taps for through- or blind holes.

• Combined Machine Tap Sets Metric
• Combined Machine Tap Sets BSW
• Combined Tap Bit Sets UNC
• Electrical Conduit Set Metric
• GO & No-GO Ring gauge Sets
• Hand Tap Sets Metric
• Hex Die Nut Sets Metric
• Hex Die Nut Sets UNC
• HexTap Double Ended Sets G(BSP)
• V-KIT HEXTAP DOUBLE ENDED SETS METRIC
• Machine Tap Round Die Sets NPT
• Round Die Sets Metric
• Short Machine Tap Sets Metric
• Twin Box Machine Tap Twist Drill Set
• Twist Drill Bit Sets

– flexible application through more inserts
– drills for dimensions up to M12
– high stock availability for standard and special dimensions
– for thread cutting by hand
– higher load capacity after the repair by better thread properties,
– temperature and corrosion resistance
– attractive and functional presentation case

• V-COIL Thread Repair Kits Metric
• V-COIL Thread Repair Kits UNC
• V-COIL Thread Repair Kits BSW
• V-COIL Thread Repair Kits G_BSP
• V-COIL Thread Repair Workshop Metric
• V-COIL Thread Repair Workshop UNC
• V-COIL Thread Repair Workshop BSW

– General Use to High Cutting Ability
– Thread Cutting by Hands
– steels up to 1200 N/mm²

• Hand Taps Metric – Coarse Thread
• Hand Taps Metric – Fine Thread
• Hand Taps Metric Left Hand
• Hand Taps Metric – Trapezoidal-Acme Thread
• Hand Taps British
• Hand Taps Imperial
• Hand Taps Pipe Thread
• Hand Taps British Pipe Thread

– Form B – Spiral Point
– Form C – Spiral Flute R35°
– colored rings for material use

• Machine Taps Metric – Coarse Thread
• Machine Taps Metric – Fine Thread
• Machine Taps Metric – Left Hand Thread
• Machine Taps Metric – Fluteless Taps
• Machine Taps Metric – Oversize Taps
• Machine Taps Metric – with Coloured Ring
• Machine Taps Metric – Undersize Taps
• Machine Taps Metric – Trapezoidal-Acme Thread
• Machine Taps Imperial
• Machine Taps British
• Machine Taps Pipe Thread
• Machine Taps British Pipe Thread

Benefit:
– Pilot for exact alignment
– Rougher and Finisher combined in one tool
– Use in awkward places
– For making new threads
– For cleaning and repairing damaged threads

• Hex Shank Taps Metric
• Hex Shank Taps Imperial
• Hex Shank Taps British Pipe Thread

for Drilling, Tapping and Deburring in one operation
with 1/4″ Hexagon Drive (Bit)

• Combined Taps Metric
• Combined Taps British

The Combined Tap enables the user to produce the tapping drill hole and the through thread in one operation without any tool changing.

• Combined Taps Metric
• Combined Taps Imperial

Hexagon Die Nuts, for general use by hand, for non abrasive material, for cleaning and repairing damaged threads and for general use in awkward places.

• Hex Die Nut Metric
  
• Hex Die Nut Imperial
• Hex Die Nut British
• Hex Die Nut Pipe Threads
• Hex Die Nut British Pipe Threads

– HSS Round Dies for general use by hand, for non abrasive material.

– HSS-E Round Dies with gun nose, for general use by hand, for stainless steel and abrasive material.

– Lapped and steam tempered high performance HSS-E Round Dies with gun nose, for thread cutting by hand and machine, for alloyed, tough-hard material, stainless steel, aluminium and spheroidal graphite cast iron.

– Lapped HSS Round Dies with gun nose, optimized for machining brass, short-chipping material and shortchipping bronze.

• Round Die Metric – Coarse Thread
• Round Die Metric – Fine Thread
• Round Die Metric – Left Hand Thread
• Round Die Metric – Round Die Gun-Nosed
• Round Die Metric – Round Die High Performance
• Round Die Metric – Round Die for Brass
• Round Die Imperial
• Round Die Other Threads
• Round Die British
• Round Die Pipe Threads
• Round Die British Pipe Threads

Metric/Metric Fine ISO, UNF, UNF and Pipe thread types available.

• Square Die Metric
  
• Square Die Imperial
• Square Die British Pipe Thread