Pull Dowel Pin (Non-Vented) – Imperial

Pull Dowel

Case Hardened

*Non Vented

P340 – Bare Steel

ANSI B18.8.2
2000

Inch Pull Dowel Pin P340 - product drawing - specifications
Basic Pin Diameter 1/4 5/16 3/8 1/2 5/8 3/4 1
Diameter Code 014 016 018 024 026 028 034
Internal Thread Size #8-32 #10-32 #10-32 1/4-20 1/4-20 5/16-18 5/16-18
Finished Diameter .2501/ .2503 .3126/ .3128 .3751/ .3753 .5001/ .5003 .6251/ .6253 .7501/ .7503 1.0001/ 1.0003
“R” Nominal .05 .0625 .075 .1 .125 .15 .2
Length Code Pkg.
1/2 0050 100 25
3/4 0075 100 25 25 25
1 0100 100 25 25 25 25 25
1-1/4 0125 100 25 25 25 25 25
1-1/2 0150 100 25 25 25 25 25
1-3/4 0175 100 25 25 25 25
2 0200 100 25 25 25 25 25 10
2-1/4 0225 25 25 25 25 25 25
2-1/2 0250 25 25 25 25 25 25 10
2-3/4 0275 25 25 25 25
3 0300 25 25 25 25 25 25 10
3-1/2 0350 25 25 25
4 0400 25 25 25 10 10
4-1/2 0450 25
5 0500 25 5
Order Number -> 1/4×1= P340-014-0100
(Diameter Code x Length Code)

*Vented pull dowels available upon request.

 

Installation Warning:  Dowel pins should not be installed by striking or hammering and when installing with a press, a shield should be used and safety glasses worn.  Hardened ground machine dowel pins shall have sufficient ductility to withstand being pressed into the recommended holes without cracking or shattering.

 

Because of the wide variety of materials in which dowel pins are used and the many design requirements which must be considered, it is not possible to provide hole size recommendations that will be suitable for all applications.

  1. discount mlb jerseys
  2. china nfl jerseys
  3. cheap jersey china
  4. cheap nba jerseys
  5. jerseys discount store
  6. jerseys cheap shop