DIN 6325 Hardened Dowel Pin

Dowel Pins

Hardened Steel

(HRC 60+ 2)

*m6 Tolerance

P004 – 6325-m6

*h6 tolerance available upon request

DIN 6325

DIN6325 Dowel Pin - product drawing - l=OAL, d=dia., z1/z2=crown length, l1=point length
Diameter 1 1.5 2 2.5 3 4 5 6 8 10 12 14 16 20 25
z2 0.08 0.12 0.18 0.25 0.3 0.4 0.5 0.6 0.8 1 1.3 1.3 1.7 2
z1 0.15 0.23 0.3 0.4 0.45 0.6 0.75 0.9 1.2 1.5 1.8 2 2.5 3
l1 0.4 0.5 0.6 0.7 0.8 1 1.2 1.5 1.8 2 2.5 2.5 3 4
Length (mm) Pkg.
5 100 100
6 100 100 100 100 100 100
8 100 100 100 100 100 100 100
10 100 100 100 100 100 100 100 100
12 100 100 100 100 100 100 100 100 100
14 100 100 100 100 100 100 100 100
16 100 100 100 100 100 100 100 100 100
18 100 100 100 100
20 100 100 100 100 100 100 100 100 100 50 25
24 100 100 100 100 100 100 100 100 50 25
26 100
28 100 100 100 100 100 100 100 100 50 25
30 100 100 100 100 100 100 100 50 25
32 100 100 100 100 100 100 100 100 50
36 100 100 100 100 100 100 50 25
40 100 100 100 100 100 100 100 50 25 25 25
45 100 100 100 100 100 50 25 25
50 100 100 100 100 100 50 50 25 25 25 10
55 100 100 100 50 25
60 100 100 100 100 100 50 25 25 25 25 10
70 100 100 50 25 25 25
80 100 100 50 25 25 25 25
90 50 25
100 100 50 25 25 25 25
120 100 25 10
Order Number -> 6325-m6 10×20
= P004-010-0020 | 6325-m6 10×100 = P004-010-0100

 

Installation Warning:  Dowel pins should not be installed by striking or hammering and when installing with a press, a shield should be used and safety glasses worn.  Hardened ground machine dowel pins shall have sufficient ductility to withstand being pressed into the recommended holes without cracking or shattering.

 

Because of the wide variety of materials in which dowel pins are used and the many design requirements which must be considered, it is not possible to provide hole size recommendations that will be suitable for all applications.

Nominal Dimension js14 Tolerance
over to
1 3 0.125
3 6 0.15
6 10 0.18
10 18 0.215
18 30 0.26
30 50 0.31
50 80 0.37
80 120 0.435
120 180 0.5
180 250 0.575
250 315 0.65
315 400 0.7
400 500 0.775